How do I print a design on a hoodie?

How do I print a design on a hoodie

Are you thinking of designing, printing, customizing and selling 3D Skull Hoodies?

Certainly, you’ll need to print them with different designs based on your customers’ tastes and preferences.

Or want to print your own hoodie at home?

  • Procedure

To print a design on a hoodie, you’ll need transfer printable paper, a functional printer, and either a 1600-watt iron or a heat press machine such as Mpress 15×15 review. There is no prior expertise necessary, and the procedure can be completed at home.

  • Transfer Paper

There are two varieties of iron-on transfer paper for inkjet printers. The first is light transfer paper, which is exclusively intended for white hoodies, and the second is dark transfer paper, which is intended for any colour hoodie including black, colourful, and even whites. Depending on the base colour of your clothes, choose one of the two. If you’re not sure which of the two is best, go with the dark transfer since it’s the safest choice. Each font is available in 8.5×11″ and 11×17″ letter sizes.

  • Your Laser Printer

The PPD range is compatible with any brand or model of an inkjet printer that uses standard inks. Set your printer’s paper type to Matte Paper, High-Resolution Paper, Plain Paper, or something similar, and make sure you choose the proper resolution (Normal). If you are printing on light transfer paper, you must print the picture in mirror mode on the transfer sheet. When using dark transfer paper, this step is optional.

  • A heat press or an iron

It is advised that you use an iron with a power rating of 1600w or above, or a heat press, to guarantee that adequate heat is provided. If not enough heat is given, the image will not be sufficiently fixed to the cloth and will fall out after a few washing. Allow the iron to get to full temperature before using it, which should take around 3-5 minutes. Iron in a circular motion for approximately 3 minutes, being careful to iron evenly across the pattern.

If you’re using a heat press, follow the same steps as with an iron, but just press for 12 seconds at 375°F at high pressure.

Types of Hoodie Printing: Different Hoodie Printing Methods

  • Screen Printing

Screen Printing, also known as silkscreen printing or screen printing, is the process used by professionals, maybe because of the excellent quality outcomes.

A nylon mesh and a stencil/template are required for a screen-print. The nylon mesh keeps the stencil in place, and a water-resistant substance blocks the negative area you want to draw.

The ink is then distributed all over the screen using a squeegee, and the ink permeable negative space enables your design to be printed.

Finally, you remove the screen and let the pattern dry and cure.

Despite the fact that silkscreen printing is one of the oldest ways of printing t-shirts, it has remained one of the most popular because it produces colourful and long-lasting patterns.

To print multi-coloured graphics, you must create many screens, since each screen only supports one colour.

This may seem to be time-consuming, but unlike other processes in which a template is used for just one design, each screen can be used several times, which is what makes screen printing efficient and suited for big orders.

However, we wouldn’t suggest it if you’re working on a variety of complicated, multi-coloured designs.

If you want to undertake mass printing where you’ll largely be dealing with identical designs, such as printing for sports teams or organisations, screen printing is a great option.

  • Direct to Garments (DTG)

This is another common strategy among professionals. It works similarly to paper printing in the workplace, and you will need inks and a textile printer to employ the procedure.

As with paper printing, you load (or create) your designs on the computer before feeding them to the printer, which prints them on the t-shirt.

The only difference between this and paper printing is that you use textiles instead of paper.

Are you looking to print out intricate designs? This strategy is your best bet.

You will be able to specify the smallest features and transfer them to the t-shirt with a high degree of precision utilising computer tools such as Adobe Photoshop.

Extra-thick layers will not be generated since the ink employed here is just thin.

If you opt to utilise DTG, be certain that the printer is of high quality. Because if you use a low-quality printer, you will most likely get a low-resolution print with unattractive spotty patterns.

  • Dye Sublimation 

If you’ve ever seen a t-shirt with a large graphic all over it, it was most likely printed using the dye sublimation process.

This approach is best suited for light textiles, particularly when printing a big pattern.

Although producing a dye sublimation is expensive, the finished design is highly clear with a high resolution, and it pleases the buyers.

Dye-sub is the greatest approach for creating beautiful graphics on polyester t-shirts.

But don’t make the mistake of showing up in cotton t-shirts; the design will almost certainly be a disaster.

When you use this approach, you’re essentially employing a particular liquid dye that dries and hardens when it comes into touch with materials such as polyester.

You must apply heat and pressure for sublimation to occur correctly.

The greatest part about this strategy is that it results in designs that are not only adorable but also long-lasting. In fact, the ink seems to become a part of the cloth, making it ideal for high-quality, professional results.

  • Heat Press Printing

If you’re just starting started with t-shirt printing and don’t have a lot of orders, heat printing is a great option. It will not only save you money but also time.

Heat printing requires the use of a specific kind of paper known as transfer paper to create your designs, which are then transferred to the t-shirt using heat and pressure.

Vinyl is often used as the transfer paper, and it contains an adhesive substance on one side and a strippable tape on the other.

After you’ve printed your design and pressed it onto the t-shirt, hold the tape and peel it away, leaving just the design.

The shiny side of the tape is usually the one that has to be stripped.

  • Heat Transfer Vinyl

This method makes use of a particularly soft material that must be cut into different shapes before being transferred to the fabric using a heat press.

  • The heat press might be a machine or an ironing board.
  • A Cricut machine is required to cut out the shapes.
  • Essentially, you’re taking one picture and transferring it to a new surface.
  • Heat transfer vinyl is appropriate if your firm is (or will be) printing tiny images or phrases.
  • Plastisol transfer

This procedure is similar to screen printing, except that instead of applying the dye to screens, you transfer it to plastisol and then to the t-shirt.

For the purpose of efficiency, many t-shirts or hoodie printing businesses employ outsourcing here.

In this respect, they create designs, submit them to a printing firm, which prints them on high-quality plastisol, and then mail the plastisol back to the t-shirt entrepreneurs.

You could use the same approach, and after you have the plastisol, you can use a heat press to adhere it to your t-shirts.

  • Computer-aided Design (CAD) Cut Printing

This is another approach that involves applying heat to transfer graphics onto the cloth.

In the vast majority of situations, the method is employed to print numbers, logos, and names.

The CAD-Cut technology is used to generate designs on coloured vinyl, which are then transferred onto the t-shirt using a heat press.

If you’re printing comparable patterns with one to three colours, the CAD-Cut approach is ideal.

Click to comment

Leave a Reply

Your email address will not be published.

Most Popular

To Top